AMS Industries Ltd. - Metal Spinning Metal Spinning Samples
  March 14, 2010    » Email Us
Guide to Metal Spinning:     Power Spinning   |   Hand Spinning   |   Automatic Spinning   |   Semi-Automatic
Guide to Power Spinning


When heavy material -- up to 3/8" thickness -- is to be formed, hydraulically-operated spinning lathes are used. This is Power Spinning.
Setting Up The Machine
The material or blank is placed on a centering pin and is then clamped to the spinning chuck with the follower.
Forming In Progress
As the material and spinning chuck rotate, the roller gradually pushes the metal against the spinning chuck, thus creating the desired shape.
Forming Completed
The material is now the exact shape of the spinning chuck. The follower (on the left) and part of the chuck, have been detached from the material and the end of the wooden chuck is now visible.













We Accept

US or Canada


Top of Page  |   Home  |   Email Us  |   Site Map

© 2010 AMS Industries Ltd.
1575 Franklin St.  Vancouver, BC  Canada  V5L 1P3
Tel: (877) 251-3591   (604) 251-3591     Fax: (877) 251-6422   (604) 251-6422
New Server