AMS Industries Ltd. - Metal Spinning Metal Spinning Samples
  March 10, 2010    » Email Us
Guide to Metal Spinning:     Power Spinning   |   Hand Spinning   |   Automatic Spinning   |   Semi-Automatic
Guide to Hand Spinning


In the Hand Spinning process, the roller is controlled by a person rather than by a machine. Hand Spinning is used for jobs with low volumes and lighter metals.
Metal Spinning by Hand

 Set-Up
The material, in the form of a circular blank, is centered on the chuck.

Below is the bottom arm of the "scissor tool" which provides greater leverage for the roller.


Forming Begins
The material begins to take on the shape of the chuck, as the roller is pressed up against the material while the lathe is spinning.


Forming Continues
Formation of the material is now about 75% complete.

Below is a detailed view of the roller pressed against the material.


Forming Completed
The material has now taken on the shape of the chuck.

Below, the material has been removed from the lathe.















We Accept

US or Canada


Top of Page  |   Home  |   Email Us  |   Site Map

© 2010 AMS Industries Ltd.
1575 Franklin St.  Vancouver, BC  Canada  V5L 1P3
Tel: (877) 251-3591   (604) 251-3591     Fax: (877) 251-6422   (604) 251-6422
New Server